Overview

The aesthetically pleasing anodised aluminium HTM 62 wall fixed rail allows all the furnishings and fixtures to simply hang from it.

The rail is manufactured from anodised aluminium extrusion and supplied in standard lengths of 2.4m, pre-drilled with 15 fixing holes. Longer lengths can be ‘butt-jointed’ and shorter lengths can simply be cut on site. If additional holes are needed, these can be drilled using the V-groove guide in the rail extrusion. A modern snap-on cover of anodised aluminium completes the rail, providing full protection and concealment of fixing screws.

For the rail to be properly installed all the fixing holes should be used. Refer to the installation guide for further information. The rail generally finishes at corners and architraves. To overcome the problem of the rail finishing mid-wall, or for external corners, end stops are used.

Toprail Securing Clip for Slotted Uprights

Securing Clip for Slotted Uprights
The clip is manufactured from a semi-flexible grey plastic and provides a durable, cost effective neat fastening arrangement.

Specification

Code Item Description Size
30.010 Rail and cover 2400mm
30.012 Cover only 2400mm
30.013 End stop – left hand n/a
30.014 End stop – right hand n/a